Brehon Agrisystems Inc GFCS916 用户手册
Rev14 2013-09-15 FCC/IC
1
Brehon Agrisystems Inc. is not responsible or liable for indirect, special, or consequential damages arising out of or in
connection with the use or performance of the product or other damage with respect to any economic loss, loss of
property, loss of revenue or profit, or costs of removal, installation, or reinstallation.
connection with the use or performance of the product or other damage with respect to any economic loss, loss of
property, loss of revenue or profit, or costs of removal, installation, or reinstallation.
G.Force
Remote Control
SWING AUGER MOVER & FULL BIN
ALARM XLDR Series
ALARM XLDR Series
INSTALLATION and OPERATING INSTRUCTIONS
The G.Force Remote Control is designed to provide the ultimate in convenience and safety to perform
tasks remotely. It is a radio frequency (RF) controlled device that allows operation of a motor, gate,
chute, etc. from a hand held transmitter operated remotely. The Transmitter, which operates at 916
MHz FM, transmits encoded information to the Receiver, which then decodes the information and
performs the desired function. When coupled with the electromechanical driver, this system may be
used to operate a motor, open a swinging gate, close a chute, turn a valve, etc. The Transmitter and
Receiver are designed to operate within 300' but actual range is dependent on operating
environment.
chute, etc. from a hand held transmitter operated remotely. The Transmitter, which operates at 916
MHz FM, transmits encoded information to the Receiver, which then decodes the information and
performs the desired function. When coupled with the electromechanical driver, this system may be
used to operate a motor, open a swinging gate, close a chute, turn a valve, etc. The Transmitter and
Receiver are designed to operate within 300' but actual range is dependent on operating
environment.
Features :
Simplicity of design and quality of engineering.
Power On/Off switch on Receiver Console
Direction Control switch on Console
LED Indicator lights.
9v Transmitter Battery
Ease of installation/removal when not in use.
All controls can be by either Manual Switch or Remote Control
Power On/Off switch on Receiver Console
Direction Control switch on Console
LED Indicator lights.
9v Transmitter Battery
Ease of installation/removal when not in use.
All controls can be by either Manual Switch or Remote Control
Multiple Transmitters can operate a single Receiver.
Multiple Receivers can be operated by a single Transmitter.
Receivers are “Channel selectable”
Optional Auxiliary 12VDC output for remote-controlled light or other device
Multiple Receivers can be operated by a single Transmitter.
Receivers are “Channel selectable”
Optional Auxiliary 12VDC output for remote-controlled light or other device
Manufactured By:
Brehon Agrisystems Inc.
102
–
2750
Faithful
Ave.
Saskatoon, SK S7K 6M6
(306)
933
2655
phone/fax
Web:
www.brehonag.com
Email: garth.brehon@sasktel.net