Mansion Industry Co Ltd KBT1 用户手册
McLelland MAP-KBT1 In-Wall Bluetooth Music Receiver
Instruction Manual
This MAP-KBT1 In-Wall Bluetooth Music Receiver keypad must be connected/powered by RJR-2 Convertor
thru RJ45/CAT5 cable from the rear panel of MAP-KBT1 to the RCA input from the amplifier system.
Bluetooth pairing:
§ The first pairing, press and hold down the Bluetooth Pairing button 5 seconds until the Blue and Red
LED begins to blink quickly, and look for the device ID “MAP-KBT1”, the LED will be shown as solid Blue
when the pairing success.
LED begins to blink quickly, and look for the device ID “MAP-KBT1”, the LED will be shown as solid Blue
when the pairing success.
§ The pairing mode timeout limit is 180 seconds, the MAP-KBT1 will be power off if there is no device
connected.
connected.
§ To disconnect, press and hold the Bluetooth Pairing button for 5 seconds until the LED turns off.
Specifications & Feature:
* Signal and Power Pair Pass-Through on RJ45 Jack.
* Local Power input on RJ45 Jack.
* Bluetooth indicates Module is Powered.
* Local Power input on RJ45 Jack.
* Bluetooth indicates Module is Powered.