China Electronics Shenzhen Company B102 用户手册
B102
USER MANUAL
Product Specification:
Main parameter:
Bluetooth version: V4.1
Main parameter:
Bluetooth version: V4.1
output power:3W
frequency response:150hz-18khz
RMS:
frequency response:150hz-18khz
RMS:
(THD = 10%)
drive:2’
power supply:USB, DC 5V 500mA
distortion:≦1%
S / N:≥ 75dB
Charging the Speaker:
Before using the speaker for the first time, charging it for at least 0.5 hours.
power supply:USB, DC 5V 500mA
distortion:≦1%
S / N:≥ 75dB
Charging the Speaker:
Before using the speaker for the first time, charging it for at least 0.5 hours.
1、Plug the USB cable into the port on the speaker, plug the other end into the USB port on the
adapter(DC 5V).
adapter(DC 5V).
2、Red LED will turn on to indicate that the unit is charging.
3、Red LED will turn off when fully charged.
Start-up& Shutdown Functions:
3、Red LED will turn off when fully charged.
Start-up& Shutdown Functions:
1、Long press POWER to start the blue-tooth speaker.
2、Blue LED g flashes, waiting for pairing
3、Long press POWER to shutdown the blue-tooth speaker.
4、LED off if shutdown the speaker.
Pairing the Device:
2、Blue LED g flashes, waiting for pairing
3、Long press POWER to shutdown the blue-tooth speaker.
4、LED off if shutdown the speaker.
Pairing the Device:
1、Place the speaker near the Blue-tooth-enabled device.
2、Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in
pairing mode.Follow the instructions of your device to search for the speaker.
2、Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in
pairing mode.Follow the instructions of your device to search for the speaker.
2、The speaker is called “B102”, enter the PIN”0000” if need.
3、Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the
state of pairing the last device default in the first 3 seconds after starting. If failing to pair, the
speaker will be in state of pairing automatically.
LED Indicator
3、Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the
state of pairing the last device default in the first 3 seconds after starting. If failing to pair, the
speaker will be in state of pairing automatically.
LED Indicator
1、Charging: Red LED on
2、Fully charged: Red LED off
3、Pairing Mode: Blue LED flashes.
4、Connected: Blue LED slow flashes
5、Line IN Mode: Blue LED on
6、Low battry: Red LED flashes
2、Fully charged: Red LED off
3、Pairing Mode: Blue LED flashes.
4、Connected: Blue LED slow flashes
5、Line IN Mode: Blue LED on
6、Low battry: Red LED flashes