Shenzhen Minde Electronics Technology LTD. MS3390 用户手册
17
5-1-2 Input Data Manually
Using the virtual keypad, user can input a barcode manually, and then send the barcode to the host or
store in the scanner.
Make sure a communication link (Bluetooth network or USB cable) is working.
store in the scanner.
Make sure a communication link (Bluetooth network or USB cable) is working.
5-1-3 Quantity Enter
User can disable the Quantity Enter and select Repeat Output mode or Output Quantity mode. When
Quantity Enter is enabled, user can set the number (0 to 9999) of barcode transmissions. For example, a
barcode “123456789” is read. When user select Repeat Output mode, Five “123456789” will be received
by the host, given that the quantity is 5. When user selects Output Quantity mode, “123456789, 5” will be
received by the host, given that the quantity is 5. The quantity decides how many identify barcodes a
host receives upon a single successful read.
Quantity Enter is enabled, user can set the number (0 to 9999) of barcode transmissions. For example, a
barcode “123456789” is read. When user select Repeat Output mode, Five “123456789” will be received
by the host, given that the quantity is 5. When user selects Output Quantity mode, “123456789, 5” will be
received by the host, given that the quantity is 5. The quantity decides how many identify barcodes a
host receives upon a single successful read.
Separator Setting- When user selects Output Quantity mode, the barcode and quantity will be
separated, the default separator is comma <,>. Separator Setting is Quantity enter-Output
Quantity-Options. By using the virtual keypad, user can input character manually. The length of the
separator string can be at most 10 characters.
Quantity-Options. By using the virtual keypad, user can input character manually. The length of the
separator string can be at most 10 characters.
The following steps demonstrate the procedure to set a quantity.
Step 1: Enable Quantity Enter, press the Scan Key to read a barcode.
Example display:
Step 1: Enable Quantity Enter, press the Scan Key to read a barcode.
Example display:
Step 2: Press Right Soft Key to the window below.
Step 3: Use Navigation Keys to move the cursor, Scan/Select Key to select number(s), Right Soft Key to
delete selected number(s). And then press Left Soft Key to continue.
delete selected number(s). And then press Left Soft Key to continue.
Step 4: Finally press Left Soft Key to complete.