Kontron Europe GmbH HFMPCIE 用户手册
HF-mPCIe-Documentation V1.3.doc3
07.04.2014
13 / 15
4 Packaging
4.1 Reader packaging
Every reader is packed into an ESD proof bag.
Every antenna is packed into an ESD proof bag.
4.2 User manual
One documentation is delivered to customer in paper and pdf.
5 Embargoed countries
In customer responsibility.
6 Installation notes
Special ESD prevention is required to assemble the HF-mPCIe RFID reader.
It is recommend to use a ESD wristband when you unpack the reader and connect it to the
host system.
The system power has to be switched off prior to the assembly.
Be aware of the following possible environmental effects when your are installing the
HFmPCIe RFID reader into a device.
Also the transponders might be effected by:
It is recommend to use a ESD wristband when you unpack the reader and connect it to the
host system.
The system power has to be switched off prior to the assembly.
Be aware of the following possible environmental effects when your are installing the
HFmPCIe RFID reader into a device.
Also the transponders might be effected by:
•
Nearby existing metal objects like housings, shielding and also PCB-boards with large
ground plates.
•
EMC effects from cables
•
EMC effects from magnetic fields.
Metal surface in direct vicinity of the active antenna will detune the antenna and thus have a
direct influence to the operating distance. Increase the distance between the antenna and
the metal layer to the possible maximum for least influence.
Communication between the reader and a transponder can never pass through a metal
layer.