Innovative Industrial Design AG-TX433 用户手册

Magnetic Asset Protection

Overview
AG MAP sensors, using Enhanced Magnetic Technology, are able to detect small Neodymium 

(rare earth) magnets at extended distances. When properly installed, neither the sensor nor 

the magnetic tag (or the object it’s on) can be moved without alarm. MAP utilizes a wireless 

transmitter (door/window) compatible with DSC 433 MHz control panels. Neodymium  

magnets are shipped separately. Visit our website for more information www.artguard.net

Install or Replace BatteriesThe model .013.1 AG MAP sensor uses only Panasonic or Maxell 

Lithium Battery CR2450and is shipped to save battery life. To ease opening run your 

thumbnail around the space between the top and the bottom of the case. Use a coin inserted 

into the notch on the side of the MAP case to twist and open (fig.1).  Insert two lithium batteries 

plus (+) side up (fig.2).

Note: the red LED should light when the batteries are installed.  Use the cupping of your 

hands to view the light through the closed case. It lights to indicate transmission only. 

Remove batteries when not in use.

Use care when closing the case. The case must be fully close to activate the tamper switch.

Warning! Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

The sensor may be discreetly mounted horizontally, on a wall behind artwork, or mounted 

vertically under shelving, or similar installation surfaces, either with double sided tape.  

It may be placed in or under any as- set that will hide it from view. Magnets (Mtags) can  

then be discreetly placed in, or taped on any valuable asset that the sensor is to secure.   

See website for further instructions www.artguard.net

Caution: Magnetic tags should be kept at a distance from watches, credit cards, heart  

monitors, etc. they are powerful sources of magnetism and may disable magnetically 

sensitive products.

Enrolling: This transmitter auto enrolls similar to DSC 433MHz based wireless products.

24 Old Rock Rd. Weston, CT 06883  

Model 013.1

Technical Support 212.989.1594   

www.artguard.net

fig. 1

fig. 2