Gait Up PHYS5POMOC 用户手册
12 June 2017 - Physilog5usermanual.pdf-v1.2.3 - Check www.gaitup.com for the latest version. Copyright 2017 Gait Up SA. CH-1015 SWITZERLAND
10
- Open DFU option of the app
- Click on “Select File” and go to the tab “user files” where you find the firmware added to
the app earlier
the app earlier
- Click on “Select device” button and look for surrounding Physilogs
- Select connect of one Physilog®5 sensors in the list
- Click on “Upload” and wait until the percentage has arrived at 100%, this may take some
minutes
minutes
- Do a reset of the Physilog® (hold the main button until the LED shines orange, blinks red
and then stops)
and then stops)
- Plug the Physilog® to the computer and update the date and time (see above)
5.5 Sensor specifications
Component
Manufacturer
Remarks
Inertial Sensors
STMicroelectronics
3D Accelerometer up to 16g
3D Gyroscope up to 2000°/s
3D Gyroscope up to 2000°/s
Ambient Sensor
STMicroelectronics
Barometric altitude from 260 to 1260 hPa
Temperature sensor accuracy of +/-1.5°C
Temperature sensor accuracy of +/-1.5°C
Radio Chip
Nordic Semiconductors
Multi-standard: Bluetooth Low Energy (BLE), Ant+,
and Near field communication (NFC)
and Near field communication (NFC)
Internal Memory
Apacer
Class 10 microSD Card, 8Gb
Microcontroller
Nordic Semiconductors
ARM® Cortex® M4 with floating-point for on-board
processing
processing
Micro-usb interface
Amphenol FCI &
Microchip
Microchip
Waterproof IP67, with dedicated chip for fast data
transfer. High-speed USB 2.0
transfer. High-speed USB 2.0
Battery
Renata
Lithium Ion Polymer Accumulators 3.7V 140mAh
Plastic Enclosure
ABS Polylac® PA-757
Biocompatible with bi-color LED and 8mm button
Operating
Temperature
Temperature
From-20° to 45°C
Assembly
Locatis Electronics SA (CH) Weight 11 grams
Dimensions 26,5 x 47,5 x 10 mm
Extension Board
(optional)
(optional)
Ublox
Melexis
Melexis
Low-power GPS/GNSS module
High-quality 3D Magnetometer
High-quality 3D Magnetometer
Component Manufacturer Remarks
3D orientation
3D orientation of the sensor is calculated on-board during the measurement when in
streaming mode (sensor started through “Data Visualizer”). A 3D model of the Physilog®5
which indicates its orientation can be displayed for illustration purposes. The Matlab
function to read the .BIN file has the option to output the quaternions and Euler angles.
streaming mode (sensor started through “Data Visualizer”). A 3D model of the Physilog®5
which indicates its orientation can be displayed for illustration purposes. The Matlab
function to read the .BIN file has the option to output the quaternions and Euler angles.