Shenzhen Jonter Digital Co. Ltd D16 用户手册
LITHIUM-ION BATTERY
WARNINGS
This device contains a non-removable
lithium-ion battery. The battery must be
recycled or disposed of properly.
Contact your local waste management
office for information on battery
recycling or disposal.
lithium-ion battery. The battery must be
recycled or disposed of properly.
Contact your local waste management
office for information on battery
recycling or disposal.
FCC INFORMATION
This equipment has been tested
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the distance between
the equipment and receiver.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
which the receiver is connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
for help.
This equipment complies with
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
1. This equipment may not cause
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
1. This equipment may not cause
harmful interference.
2. This equipment must accept any
interference received, including
interference that may cause
undesired operation.
interference that may cause
undesired operation.
Modifications not authorized by the
manufacturer may void the user’s
authority to operate this device.
manufacturer may void the user’s
authority to operate this device.
FCC ID:
2AB9SD16
Merrimack, New Hampshire, USA 03054
800-846-3000 • Brookstone.com
CHARGING THE SPEAKER
1. Connect the USB Cable (included)
to the Micro USB Port on the
speaker.
2. With the speaker power off, plug
the other end of USB Cable into a
USB Port on your PC or a 5V 1A
adapter (not included).
3. The LED Indicator light will illuminate
red while charging and will turn off
when speaker is fully charged.
Charges in approximately
to the Micro USB Port on the
speaker.
2. With the speaker power off, plug
the other end of USB Cable into a
USB Port on your PC or a 5V 1A
adapter (not included).
3. The LED Indicator light will illuminate
red while charging and will turn off
when speaker is fully charged.
Charges in approximately
3
hours
for up to
10
hours of listening
enjoyment.
NOTE: When battery is low, the speaker
will sound a beep tone every minute.
NOTE: When battery is low, the speaker
will sound a beep tone every minute.
TURNING THE SPEAKER ON/
OFF
1. Press and hold the Power Button for
2 seconds. The speaker is turned on
and will sound ascending tones. The
LED Indicator quick flash blue.
2. Press and hold the Power Button for
2 seconds. The speaker is turned on
and will sound ascending tones. The
LED Indicator quick flash blue.
2. Press and hold the Power Button for
4
seconds again. The speaker will
sound tones. The LED Indicator lits
off and the speaker is powered
off.
off and the speaker is powered
off.
Mini Bluetooht Speaker
Go with music everywhere
LOCATION OF PORTS AND
CONTROLS
1. Power/Pairing Button
2. Volume Up Button
3. Volume Down Button
4. Micro-USB Charging Port
5. LED Indicator
6. Aux-In Port
7. Micro-USB Charging Cable
(not shown)
8. Nylon Strap (not shown)
2. Volume Up Button
3. Volume Down Button
4. Micro-USB Charging Port
5. LED Indicator
6. Aux-In Port
7. Micro-USB Charging Cable
(not shown)
8. Nylon Strap (not shown)
1
2
2
3
4
4
6
5
320672 • 320673 • 320674 • 321179