XYZprinting Inc. 3F11X 用户手册

V1

P 2

Cartridge Slot

Display Panel

Extruder Module

Z-Axis

Front Door

Print Bed

USB Flash Disk Slot

Remove the print bed 
fi xing screws and printing 
module fi xers

Remove the 

packaging supports

USB Port

LAN Port

Power Switch

Power Connector

．

Side Cover Plate

 x2

． Cleaning Wire

．Glue Stick

．Filament Cartridge

．Cartridge Locker

． Scraper

．

USB Cable

．USB Flash Drive

．

Power Cord

U

Clea

Do not place the printer in humid or dusty environment such as bathrooms and high traffi c areas. Do not place the 
printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it may cause serious injury. 
Do not touch the interior of the printer while printing. As it may be hot and include moving parts. Please keep the front 
door closed during printing to avoid injury. 

•The maintenance tools provided should be only handled by an adult. Please keep the tools away from children.  
    Incorrect handling or maintenance of the printer may cause damage to the product or personal injury.
•Be  sure to maintain the printer while the print bed is cool.

•The scraper is used to remove the object from the print bed when printing has fi nished and the print bed is cool. 

•Over time, carbon deposits or fi lament dust buildup in the nozzle may decrease its performance.  It is advised to 
    clean the nozzle with the cleaning wire by activating "CLEAN NOZZLE" mode after every 25-hour of printing.

•Molten fi lament may be left on the tip or surface of the extruder and inside the drive gear and may decrease the 
    performance of the printer, or lead to calibration result of “Error”. The copper brush is used to clean and remove the 
    fi lament pieces from the extruder in these cases.

． Copper Brush