Auris Inc. AU04 用户手册
bluMe
is connected but the LED indicator does not light up.
Confirm that the power adapter is connected to
bluMe
with the included
USB cable and plugged into a functioning AC outlet.
My device does not pair with
bluMe
.
Ensure that Bluetooth is turned ON on your device. Make sure that the
LED indicator is blinking and your device is within
LED indicator is blinking and your device is within
bluMe
’s wireless range
of 30 meters (100 feet).
The LED Indicator is solid, but I cannot connect my device.
Check whether no other devices are connected. If so, either disconnect or
turn off Bluetooth on the other devices or press and hold the Power / Pair
button till it flasshes, then try connecting.
Try unpairing and repairing your device to
Check whether no other devices are connected. If so, either disconnect or
turn off Bluetooth on the other devices or press and hold the Power / Pair
button till it flasshes, then try connecting.
Try unpairing and repairing your device to
bluMe
.
Power cycle
bluMe
by disconnecting and reconnecting the power cable.
The LED indicator is solid and my device is connected but there is
no audio output.
Ensure that the
no audio output.
Ensure that the
bluMe
output is correctly connected to your audio system.
Check whether the audio source is correctly selected on your music system
(analog audio or digital optical input).
Verify the volume levels on your computer OS and player app.
Try unpairing and repairing your device to
(analog audio or digital optical input).
Verify the volume levels on your computer OS and player app.
Try unpairing and repairing your device to
bluMe
.
Power cycle
bluMe
by disconnecting and reconnecting the power cable.
The volume output level from
bluMe
is Low.
Verify the volume levels on your computer OS and player app.
Also check the volume levels on your powered speakers or stereo system.
Also check the volume levels on your powered speakers or stereo system.
TECHNICAL SPECIFICATIONS
Bluetooth
®
Version
4.1 with aptX
®
Low Latency
Supported Codecs
aptX, AAC, SBC
Input
Bluetooth
Outputs
Stereo Analog RCA
Digital Optical (SPDIF)
Digital Optical (SPDIF)
Bluetooth
®
Range
30 meters, 100 feet
Input Power
Output Voltage
5V, 200 mA
2 Volts RMS
Output Impedance
57 Ohms
D/A Converter
AKM AK4396
Frequency Response
10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio
120dB
Total Harmonic Distortion
+ Noise < 0.02%
Latency
~30 milliseconds (ms)
Enclosure
Aluminum
Included Accessories
RCA-RCA Audio Cable
RCA-3.5mm Audio Cable
USB-microUSB Cable
Microfiber Bag
User Guide
RCA-3.5mm Audio Cable
USB-microUSB Cable
Microfiber Bag
User Guide
1 inch (25 mm)
3.5 inches (90 mm)
2.95 inches (75 mm)
Weight: 5.1 oz (145 grams)
Dimensions
Height
1.00
inches
(25
mm)
Width
3.50
inches
(90
mm)
Depth
2.95
inches
(75
mm)
Weight 5.10
ounces
(145
grams)
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by Auris, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate
the equipment.
that are not approved by Auris, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate
the equipment.
CAUTION: To reduce the risk of electric shock
do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
Keep product dry to avoid affecting the interior circuitry of the product.
Don’t put the product in direct sunlight or place in hot areas.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
circuit board.
Don’t take the product apart or the warranty will be voided.
Don’t drop the product.
Don’t use chemical or detergent to clean the product.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to
hear surrounding sounds could be dangerous.
excessive volume while driving or in any other activity where failure to
hear surrounding sounds could be dangerous.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
SAFETY INSTRUCTIONS
WARRANTY
Don’t worry. Your auris
bluMe
is covered under our warranty. For warranty
information please visit:
www.theauris.com/warranty
www.theauris.com
support@theauris.com
© 2015 Auris, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
The aptX® mark and the aptX® logo are trade marks of CSR plc.
or one of its group companies and may be registered in one or more jurisdictions.
All other trademarks and logos are property of their respective owners.
Designed in the U.S.A. I Made in China.
Auris, Inc.