Diggin Active Inc. 13LPB10007DG 用户手册

Cut line

Page 4

Size:210mmX297mm (Jan/29/2014,R01)

This product is intended only for outdoor recreational use in pitching

lightweight plastic baseballs, provided by Diggin active Inc.

Use only with balls designed for use with this item by Diggin.

All person(s) not batting should stand behind the pitching machine.

Do not use the product for any other purpose or with any other object or ball.

Do not us regulation baseballs or teeballs.

Do not point toward breakable objects, for example: Windows,outdoor 

lights,etc.

If the product jams, turn machine to “OFF” position. Pick it up,point toward

ground away from a person or breakable odject, dislodge ball.

Use product only on a  flat surface.

Adult Assemly and Supervision Required.

Cut line

Page 1

Page 2

Page 3

 

Machine Base                     1pc

Bat Top                                  1pc

Bat Handle                           1pc
Ball Carriage                        1pc

                    Machine Support               3pcs

Baseballs                               5pcs

1.Install the machine support to the base;

2.Install the ball carriage at the top of the base;

3.Load the balls into the ball carriage;

4.Assemble the two setions of the bat;

Install 4pcs “D” size(1.5V) 

batteries following 

the polarity(+/-).

1.Unscrew the battery carriage screw with a Phillips screwdriver

2.Install 4 “D” size batteries(not included)

   

Install 1pc 9V 

battery following 

the polarity(+/-).

Machine

Base 

Bat Handle 

Auto

OFF

1

.The chute opening can be rotate 30 degree, 40 degree, 50 and 90 degree positions;

2.When trun machine to “Auto” position, the balls will be shoot out automatically in every 8 seconds 

   and shooting distance  around 20 feet;

3.When trun machine to “BAT” position, the balls will be shoot out 1 second after pressed the RF button 

   of bat;

1.

Read and follow all instructions noted here before use, and keep these instructions for future reference.

2.Don’t mix alkaline and rechargeable nickel-cadmium standard ( carbon zinc ) batteries.

3.Remove and dispose of worn out batteries safely.

4.The supply terminals are not to be short-circuited.   

5.Don’t mix new and old batteries.

6.Don’t get your batteries wet, and never operate the pitching machine in sand, mud, water or snow.

7.Do not dispose of batteries in fire.

+

-

+

+

+

-

-

-

+

+

-

-

 2013 Diggin Active, Inc.   www.digginactive.com      MADE IN CHINA      Questions? Contact: 1-888-388-8835

R

OFF

AUTO

BAT

BAT

Off

On

Auto

The low-speed will be switched automatically 
when the barrel in 90 degree position
(For pop up pitching)

20 feet

30 degree

40 degree

50 degree

Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the interference by one 

or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help. 

90 degree