Beijing Noitom Technology Ltd. MSW-P-S-01 用户手册

Case

Keyboard

Charging Case 

Body Sensor ×17

Shaft Sensor ×2

Receiver

Body Sensor Base ×15

MySwing Pro sensors must always be kept at least 3 feet away from all magnetic 

fields. Magnetizing a sensor will cause noticeable errors in the avatar. If this occurs 

repeatedly, contact Customer Service to have the sensor recalibrated or replaced.

Keep Away From Magnetic Fields.

Connect the straps to the sensor bases.

Use the appropriate length of strap that fits the player for each segment. Attach 
the straps according to the diagram.

Attach the appropriate label (e.g. forearm, thigh, etc.) to the straps, if desired.

Velcro Straps ×15

Antenna

Tablet

Shoulder Harness

Transformer for Charging Case

Shoulder Harness

Place the sensors into the bases.

Rotate the sensors 90 degrees counter-clockwise. Handle the sensors gently, 
do not over tighten.

Attach shaft sensor just below the grip with charging contacts pointing down. 

Align the shaft sensor parallel to the club face as shown.

To turn on, hold the button for 2 seconds.

To turn off, hold the button for 5 seconds.

LED Colors

LED Status

frequency 1

frequency 2

frequency 3

frequency 4

frequency 5

charging, low battery, 

or sensor error

Green ( frequency 1 ) is the default.
( multiple systems in close proximity must use different frequencies )

Slow Blink

Standby

Fast Blink

Working

Double Blink every 3 
seconds

Sleep Mode

Blinking Red LED

Indicates Low Battery 

( approximately 20 minutes remaining )

Constant Red Light 
outside of charging dock

Sensor Error 

( Reset Sensor )

3 Feet

Start mySwing Professional software.

Add new student by clicking the plus      button.

Enter Student’s Information, Height, Wingspan, and Agree to the Terms of Use.

Proceed to Screen/Swing Tab.

Click on the Connect icon        and follow the on-screen instructions.

Parallel

PART 1

PART 2

PART 3

PART 1

PART 2

To reset sensor, turn on, then hold the button for 10 seconds. 
( Sensor must be fully recharged after reset. )