P12 Enterprises/ Allen Bogdanoff E4405B 用户手册

VI. Connection:

VII. Attention

1. Please check whether the input voltage of the constant voltage power supply is in accordance

with the controller, and please check the connection of both the cathode and anode, otherwise the

controller will be broken.

2. Please don’t connect wires with power on.

Please switch on again only when it is in right connection and no short circuit.

3. Please keep your finger off the touch ring when installing the batteries to improve its sensitivity,

and use the remote (3 seconds later) after the batteries are install LED.

Please reinstall the batteries, if the touch ring is found low-sensitivity.

4. Please do not use the controller in the place with widely range metal area or with strong

electromagnetic wave nearby, otherwise, it will seriously affect the remote distance.