Red Bear Company Limited B-B1 用户手册
Beacon B1 Instruction
Overview
Congratulations on your New Beacon
device. To develop basic understandings and
get the most out of your purchase, be sure
to carefully read this manual and keep it on
hand for future reference.
Features:
-Bluetooth SIG Qualified product
-Apple’s iBeacon compatible
-Support Android 4.3 or later
-Security password setting
-Over-the-Air Firmware Upgradable
-Configurable to suit your Apps
-No Overhype
-Long battery life with 2pcs AAA battery
OFF / ON
Switch
Hanging hole
Mode button
LED
Specification:
Standard
Bluetooth 4.0 Low Energy
Chipset & Stack Texas Instruments’s CC254x SoC and BLE Stack
Antenna Type Multilayer Chip Antenna
Physical Range Up to 50 meters (Depends on enviornment)
Power Supply Two triple-A (3A/AAA) batteries
Current Consumption (average) 0.25mA
Battery Life
4500+ hours;over 1year (operating 12hours/ day)
Dimension
(W)25mm x (H)70mm x (D)18.3mm
Net Weight
15gram
How to maintenance B1
1) Download our open sourced Sample Configuration App
http://www.redbear.net/support.html
2) Compile & Run the App on iOS device, it will show
“Searching for B1 in range”.
3) Switch ON the Beacon: Green light turns on. (now in
broadcasting mode)
by default the green LED is ON. It will broadcast iBeacon
signal periodically.
4) Press mode button: Red light turns on. (now in maintenance
mode)
5) App found B1, you can modify Beacon characteristics:
(See picture at right)
Tip: Adjust the value of iBeacon
signal “Measured Power” to aid
iOS determining more accurate
distance estimation, check out our
support page.
© 2014 RedBear. All Rights Reserved.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment