Quanzhou Leixen Electronics Co. Ltd 898UV 用户手册
28
simply tune the radio in 50 KHz tuning steps. Setting
FM Scan (Menu 14) to ON will increase tuning speed,
as only active FM radio signals will stop tuning.
FM Scan (Menu 14) to ON will increase tuning speed,
as only active FM radio signals will stop tuning.
FM SQL (FM SQL): Menu 15
The FM SQL menu determines the sensitivity of the
FM broadcast scan. The higher this setting, the
stronger a signal must be in order for the scan to stop
on a particular FM broadcast channel. Settings range
from 0 (always on) to 9 (tightest squelch for scan).
The default level is 5.
FM broadcast scan. The higher this setting, the
stronger a signal must be in order for the scan to stop
on a particular FM broadcast channel. Settings range
from 0 (always on) to 9 (tightest squelch for scan).
The default level is 5.
Font size (Choose
˄Font): Menu 16
You can select the font size of the channel display
through this menu. Select “BIG” to show both
channels in a larger font. Choose “SMAL” to have the
active channel in a larger font and the second channel
in a smaller font. The default setting is SMAL.
through this menu. Select “BIG” to show both
channels in a larger font. Choose “SMAL” to have the
active channel in a larger font and the second channel
in a smaller font. The default setting is SMAL.
Note: “BIG” font can only be set if Channel Alias is also set as
active.
active.
Key Lock Function (Keylock): Menu 17
You may lock the transceiver controls by holding the
“M” key for one second. When the lock is enabled,
the
“M” key for one second. When the lock is enabled,
the
symbol appears. Unlock the transceiver controls
by again holding the “M” key for one second.