Mustech Electronics Co. Limited UM018G 用户手册
11. Troubleshooting
Problem
Solution
After switched to WIFI
position, the LED does
not light.
1). Rotate the LED dimmer to
check if it is on.
2). Charge the battery.
The microscope is
halted.
When the microscope is on,
use a pin to press the Reset
button, and then power it on
again.
The preview by WiFi is
quite slow.
Reset the microscope by
using a pin to press the Reset
button when the microscope
is on and then power it again.
Go to app, enter Setting and
carry out Clear cache.
I forget my new WIFI
connection password.
Create a .txt file named
PASSWORDRESET, type
YES in the file, and then put
the file in a Micro-SD card.
Please make sure that it is the
only file in the card. Insert the
card to microscope and
power it on by sliding to WIFI