ShenZhen Allmart Electronic Co. Ltd R5 用户手册

下载
页码 6
 
 
Operation Instruction 
1 Turn On/Off 
Charge the device via the supplied adaptor(DC 12V 3A).
 Turn on the hard switch 1 on the 
back of the base. The device will be on standby mode while “
” turns orange and the 
color light blink once. 
 
Long press the “
”(3 seconds) to switch between the Power on mode
 
(all the buttons are 
blue) and standby mode(“
”is orange and others are out) 
 
 
2. White Light and RGB Light Control 
 
In Power on or standby mode, long touch the top mesh ( 3 seconds )to switch between 
white and RGB color mode. while at the RGB color mode, short touch the top mesh to 
change the lighting colors(red,green,blue,green,pink,orange) and the rhythm of light(while 
music playing) in order sequence to recyle.
 
While at the white color mode,
 
long touch the 
top mesh to change between four lighting levels from dim to bright.
 
 
 
 
3. Bluetooth Connection and Music Playing 
 
 
A.Bluetooth Connection. 
Turn on the device R5 and touch the “M” button to switch to Bluetooth mode(
prompt voice
 
“Bluetooth Mode”
, “BT” signal will blink on the screen while unpaired with your device, it 
stops blinking while paired successfully.   
 
On your device, connect to the device R5 using Bluetooth. See your device’s 
documentation for instructions on making a Bluetooth connection.   
Note: IOS system devices will need to connect with both “R5” and “R5_ble”. 
 
 
B. Music Playing Control   
In Bluetooth model, control the music playing by touching the buttons on the device R5.   
Long press “+” ”-” buttons to adjust the volume. Volume level will be displayed on the 
screen (maximum  at “U:31”).  
Short press “+””-” to switch songs respectively.   
Short press “
”to play or pause. 
 
4.TF Card, USB Disk, AUX Mode and USB speaker 
Inserting TF Card/USB Disk into the corresponding slot can activate corresponding mode 
(prompt voice “TF card playing” and “U-Disk playing”). User can also short press “M” button 
to switch from different modes(the corresponding mode can’t be activated If the slot is 
unoccupied).  This device supports Hot-plug, the last inserted is prior to be read and