Touchtown Inc. TT3002 用户手册
Wireless Ecosystem
Version 0.3, March 2014
Pendant User Guide
Pendant User Guide
The system locates a pendant alert
Reset the alert
Where can I use the Pendant?
What do the status lights mean?
Call for Help
Push the “Help” button for 1 second. When you see the right red LED light blinking,
the call was successfully sent.
The nearest locator description will be displayed with the pendant alert both on the
CMU and a pager. It may take around 12 seconds for the system to calculate the
closest locator.
Push and hold the “Help” button for 6 seconds. The both red LED lights will blink 3
times.
times.
The Pendant will work in the Alert Coverage Area set up during the system installation.
The Pendant will NOT work if you leave the campus. Do not use the pendant in a
shower or bath as it is not waterproof.
The Pendant will NOT work if you leave the campus. Do not use the pendant in a
shower or bath as it is not waterproof.
Light Pattern
Meaning
Left Red LED blinks twice
You have successfully completed adding the
device wirelessly to the system
device wirelessly to the system
Right Red LED blinks 3 times
then blinks slowly
then blinks slowly
An active alert has been successfully sent.
The LED will blink for 3 minutes and then will
stop blinking to preserve battery.
The LED will blink for 3 minutes and then will
stop blinking to preserve battery.
Both Red LEDs blink 3 times
after an alert has been sent
after an alert has been sent
You have successfully closed an active alert.
HELP Button
Status Lights