Dragon-i Toys Ltd. 80620 用户手册
10m
Toy-Fi Cloud
3. Once the message plays, you can answer, press
the right paw one time (blue button). The heart will
turn on. Record your message and press the button
again to stop recording. The message is sent
automatically !
4. The APP will then receive the message and inform
you a message has been received. You can now
listen to this message on your smart device.
STEP 3
Send a Local Message
You can send local messages and long distance
messages to Toy-Fi Teddy through out Toy-Fi Cloud.
1. Go to messages on your Toy-Fi APP and record a
message. You can now send the message to Toy-Fi
Teddy.
2. When a message is received from Toy-Fi Teddy, the
heart will blink fast. Wait until the heart blink slowly
and press the left paw (green button) to play the
message.
I miss
you!
I miss
you!
Come
back soon!
Come
back soon!
Additional Notes:
• Toy-Fi Teddy requires a Bluetooth connection with a
mobile device. A device with the Toy-Fi APP needs
to be within 10 meters of Toy-Fi Teddy.
• In step 4 you can enable more devices to connect
to Toy-Fi Teddy and enable friends and family to
send messages to Toy-Fi Teddy.
• You can send a reply to a message after you listen
to them. You can not originate a recording message
from the Toy without listening to a message first.
• Any other question ? Please ask us on Toy-Fi.com
STEP 4
Connecting with more people
From the Toy-Fi Teddy APP you can invite friends to
connect with your Toy-Fi Teddy. Follow the instruction
in the Toy-Fi Teddy APP. An email will be sent to your
friends to download the APP with a security key to get
connected.
Additional Notes Step 2:
• Enter a valid email address so it can be verified. If
you did not receive an email, look in trash or spam
as some emails can be filtered! We need a valid
email so we can create a key that locks your child’s
toy to your device. Child safety is important to us!
• Ensure you have a data connection. Wifi or cellular
data.
• Ensure Bluetooth is ON in you settings of your iOS
or Android device.
• Toy-Fi APP is on Android and Apple APP stores,
search Toy-Fi.
• Ensure you are within 10 meters of Toy-Fi Teddy.
• If light on Toy starts blinking and APP
informs you that Toy-Fi firmware is
updating please keep APP open and
stay within 10 meters. Toy-Fi firmware
update takes around 2 minutes.
STEP 2
Set-Up the Toy
Download ToyFi APP on an iPhone, iPad, iPod Touch
or Android device. Once the APP is downloaded it
will ask you to go through the registration process.
Confirm your email and you will be able to connect
the Bear. Now follow the steps on your app! Please
be within 3 meters of toy to ensure strong connection.
• Please ensure that you iOS or android device is
compatible to connect to Toy-Fi Teddy. iPhone4S
and Later, Ipad 3 and later, iPad Mini, Ipod 5 –
Later, Select Android devices – Please reference
www.toy-fi.com for list of Android devices
supported
Additional Notes Step 1:
• Ensure batteries are placed in battery slots properly
and in marked direction
• Ensure to use fresh batteries
• Ensure power switch is ON
Under Toy-Fi Teddy
Turn power to “ON” Position,
to activate your Toy-Fi Teddy.
STEP 1
Power Up
Operates on
3 x “AA”/LR6
batteries.
Note: When toy is powered on correctly the heart will
flash 2 times during initial power up.
TOY-FI TEDDY
INSTRUCTION SHEET
Caution: changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. NOTE: This
equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Dragon-i Toys Limited is under license. Other
trademarks and trade names are those of their respective owners.
SIG, Inc. and any use of such marks by Dragon-i Toys Limited is under license. Other
trademarks and trade names are those of their respective owners.
BATTERY SAFETY INFORMATION
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted in position according to polarity.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Do not attempt to burn batteries.
- Dispose of batteries safely and correctly
- Remove batteries if the toy will not be used for a long period of time.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short circuited.
- Do not use rechargeable batteries.
- Non-rechargeable batteries are not to be recharged.
- Batteries should be replaced under adult supervision.
- Do not dispose of in fire.
- Different types of batteries are not to be mixed.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted in position according to polarity.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Do not attempt to burn batteries.
- Dispose of batteries safely and correctly
- Remove batteries if the toy will not be used for a long period of time.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short circuited.
- Do not use rechargeable batteries.
- Non-rechargeable batteries are not to be recharged.
- Batteries should be replaced under adult supervision.
- Do not dispose of in fire.
- Different types of batteries are not to be mixed.
D80620003
3+
!
D80620003 Toy Fi Teddy IS
Size: 370 x 210mm
Date: 28th Feb 2014