Crane equipments.ca inc DL300 用户手册
Product name:
Portable transmitter DL300
Model number:
DL300
Company name:
Crane equipment.ca Inc.
User guide
Remote control
The operator activates the remote momentarily pressing button # 1.
An activation time of four seconds is set inside the remote control.
A green light flashes on the remote control for the time of activation.
The operator presses the button # 2, and holding for at least one second, causing the radio transmission of the signal to
the controller.
the controller.
The remote control is powered by 3 alkaline battery AAA type.
Pairing
The operator presses the programming button of the controller temporarily;
The operator presses first the button #2 and holds it, then press the button #1 on the remote control for a period of
about 10 seconds.
about 10 seconds.
This device complies with FCC Part 15 and Industry Canada license exempt RSSstandard(s). Operation is subject to the
following two conditions: (1) this devicemay not cause interference, and (2) this device must accept any
interference,including interference that may cause undesired operation of the device.
following two conditions: (1) this devicemay not cause interference, and (2) this device must accept any
interference,including interference that may cause undesired operation of the device.
This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not
emitted in excess of the Health Canada’s requirement.
emitted in excess of the Health Canada’s requirement.
“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.”
authority to operate the equipment.”
Label is locate at the back of the battery cover on the portable transmitter