SHENZHEN KENXINDA TECHNOLOGY CO. LTD GOAL 用户手册
- 13 -
3. Don’t put the equipment in overheated places.
4. Don't keep the equipment in under cooled places; otherwise, when the temperature
rises to normal, moisture may be generated within the equipment, resulting in
damage of the circuit board.
5. Please open the equipment as per the descriptions in the manual. Don't try any other
means.
6. Don’t throw, knock or shake the equipment. Any rough treatment of the equipment
may result in damage of the inner circuit board and its exquisite structure.
7. Don't clean the equipment with ardent chemical, detergent or strong wash.
8. Don't paint any dyestuff on the equipment. Painting may block foreign substances in
detached parts and thus affect the normal operation.
9. Clean the lens with clean, dry soft cloth (such as the camera lens, range sensor and
light sensor).
10. Only use matched or approved antenna for substation of the damaged one.
Unapproved antenna, alteration or accessories may result in damage of the
equipment and violence of relevant specifications on radio equipment.
11. Please use the charger in indoor area.
12. Back up data that should be kept (such as the address directory and calendar
memorandum).
13. Please turn off the equipment and take out the batter to restore the equipment setting
irregularly to maintain the optimal performance.
The above suggestions also apply to your equipment, battery, charger and other
accessories. In case any device doesn’t work, please take it to the nearest authorized
maintenance agency for repair.
21．Important safety directions
Operating environment
Either used in the normal point near the ear or used at a distance of 2.2cm (about 7/8
inches) from the body, the mobile is up to the requirements of RF radiation specifications.
If mobile pouch, waist-belt pouch or bracket is used for carrying of the mobile, make
sure the accessory has no metallic elements and the distance of the mobile and the body