DONGGUAN YUNLONG ELECTRONICS CO. LTD RT-95 用户手册

 

9 

 

NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB; AND IT 
CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT SECTIONS 
WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDER THIS SILENT PART 
THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING. 
- 

NOTE FOR AUTO SPLIT: DURING USB RECORDING FROM TURNTABLE, WHEN THE UNIT HAS 

DETECTED ANY PARTICULAR SILENT PART, THE TURNTABLE WILL STOP MOMENTARILY. THE TURNTABLE 
WILL RESUME OPERATION ONCE THE USB DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED. 
 

- 

PRESS AND HOLD CD/USB BUTTON TILL LCD SHOWS “BT”, THEN THE UNIT IS READY FOR 

CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE). 

- 

SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT 

“TCP9560” BLUETOOTH EQUIPMENT FOR CONNECTION. 

- 

AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START 

TO PLAYBACK YOUR DEVICE. 

- 

THIS UNIT HAS NFC FUNCTION WHICH CAN ALLOW YOUR BLUETOOH DEVICE (SUCH AS 

MOBILE PHONE) CONNECTING WITH THE UNIT AUTOMATICALLY.   

- 

SWITCH ON THE BLUETOOTH AND NFC FUNCTION OF YOUR DEVICE, THEN PUT IT NEAR 

THE                LOGO  WITHIN  5MM  ON  THE  FRONT  PANEL.  YOUR  DEVICE  CAN 

AUTOMATICALLY SEACH AND CONNECT WITH THE UNIT. 

- 

TO DISCONNECT WITH THE UNIT, PUT YOUR DEVICE NEAR THE “BT/N” LOGO WITHIN 5MM 

ON THE FRONT PANEL AGAIN. 

PRESS  X-BASS BUTTON, LCD SHOWS “BASS ON”, BASS LEVEL WILL BE ENHANCED DURING 

MUSIC PLAYBACK. PRESS X-BASS BUTTON AGAIN, LCD SHOWS “BASS OFF”, BASS BACK TO 

NORMAL LEVEL. 

DURING MP3 MUSIC PLAYBACK, PRESS ID3 button ON TH REMOTE CONTROL, IT CAN SWITCH 

ON OR OFF ID3 DISPLAY. IF ID3 DISPLAY IS ON, IT CAN SHOW THE MP3 DETAILS INCLUDING TILE 

NAME, ARTIST NAME AND ALBUM NAME DURING MP3 PLYBACK.

- 

THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER / 

SPEAKER BY 3.5MM EARPHONE JACK. 

- 

THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND 

SPEAKER) BY LINE-OUT SOCKET AT REAR CABINET. 

 

To save energy, if there is no audio signal from CD / Turntable / AUX IN / USB / for a period of over 10 minutes, then 
the unit will automatically switch to Standby Mode.