Prentke Romich Company ACN1400 用户手册
Storing Your Device
 If you are not going to use the device for at least a month, store it in a dry place with
moderate temperatures (not too cold or too hot).
moderate temperatures (not too cold or too hot).
1. Charge the batteries to Full.
2. When the batteries are fully charged, go to the Toolbox and select Maintenance Menu.
3. Open the Battery Menu.
4. Select Enter Ship Mode.
5. Respond Yes to put your device into Ship Mode.
6. Select OK to exit the Battery Menu.
7. Select OK to exit the Maintenance Menu.
8. Unplug the battery charger.
When you are ready to use your device again:
1. Plug in the battery charger.
2. Press the power button on your device. Your device will boot up. Leave the charger plugged
in until the batteries are fully charged.
You can always check the status of the charge by looking at the bar graph next to the battery
icon in the status display area.
icon in the status display area.
If the batteries have gone completely dead: Plug in the battery charger. The charging LED on
the front of the device will begin to flash rapidly, indicating the batteries are charging. Leave
the battery charger plugged in until the charging LED is only flashing about once a second which
indicates the batteries are full. For additional information, see “Battery Troubleshooting” on
page 31.
the front of the device will begin to flash rapidly, indicating the batteries are charging. Leave
the battery charger plugged in until the charging LED is only flashing about once a second which
indicates the batteries are full. For additional information, see “Battery Troubleshooting” on
page 31.
Accent 1400 Hardware Manual
Page 2
4