Luen Ming Electric Works Co. Ltd. RF001 用户手册

 

HOW TO USE 
Charger: 
1.  Plug the adapter unit into an available AC outlet. The adapter works with most 100-240V AC power outlets. 
2.  Charger LED only for charger power indication. 
3.  The adapter can charge two RF battery by the split cord at the same time 
Note: For 240V, use appropriate country adapter. 
4. Do not try to charge battery pack by other company. 
 

RF Battery pack: 
Press button holding for 3 seconds to activate 
Press button to select output setting and to power off 
4 level Output Settings 
25%-50%-75%-100% 
1 light ON=25% output (during discharging)                 
4 lights ON=100% highest setting 
 
RF remote controller: 
The remote can control two RF battery to activate at the same time 
Press “ON” button holding for 3 seconds to activate in two metre     
Press “ON” button to select output setting and to power off 
4 level Output Settings 
25%-50%-75%-100% 
1 light ON=25% output (during discharging)                 
4 lights ON=100% highest setting 
Press “OFF” button to power off directly 
 
 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: 

(1) This device may not cause harmful interference, and   

(2) this device must accept any interference received, including interference that may cause 

undesired operation. 

 
CAUTON: 
1. Burn hazard, fire hazard and explosion hazard associated with mishandling of the battery 
2. To avoid possible hazards, do not crush, disassemble, dispose of in fire, or similar actions 
3. Risk of Fire and Burns. Do Not Open, Crush, Heat Above 65℃ 
4. Changes or modifications not expressly approved by the party responsible for compliance could void 
the user’s authority to operate the equipment.