ShenZhen DongSheng Electronic Technology Co. Ltd ER151 用户手册
ER-151
Polymer Battery 1500 mAh
MANUAL BOOK
Method Of Operation
03
2.0 Speaker
Specification
04
RMS
: 4W x 2
Driver
: 1.5” x 2
Impedance
: 4Ω
S/N Ratio
: 60dB
Frequency Response
: 80Hz~20kHz
Function
: Wireless Bluetooth A2DP stereo music
player, built-in lithium battery with Mini
USB Charging, AUX 3.5 stereoscopic
socket signal input.
Cabinet Material
: Rubber + Plastic
Color
: Black
Power Supply
: 3.7V 1500mAh (Polymer rechargeable battery)
Accessories :
Micro USB
AUX Cable
Gadget Strap
05
Product Description
This Bluetooth speaker using the OVC Bluetooth chip, accord with V2.0 +
EDR (A2DP) protocol specification. Peer-To-Peer connect the transmission
distance up to 10 meters, it can be connected to a computer with Bluetooth
technology, so can get rid of the constraint of cable, play the
ultra-high-quality music, Audio AUX-IN input.
Interface Function
1. On/Off : Power switch.
2. USB
: MINI USB charging port
(3.7 V 1500mAh).
3. AUX
: Φ3.5 stereo audio signal input
interface.
Key Function
1. Bluetooth play / pause ( long press 3 seconds
Bluetooth re-paired, long press five seconds can
soft switching )
2. Long press to adjust the volume plus,then
short press to adjust the next song (only valid
using in the pattern of Bluetooth play)
3.Long press to adjust the volume down,then
short press to adjust the PREV (only valid using
in the pattern of Bluetooth play)
02
1
2
3
1. Bluetooth pairing mode: Turn the power switch to the ON position。Bluetooth
mode by default。Automatically enters pairing for the first time to use the native
Bluetooth audio connection (10 seconds back linked connected Bluetooth devices, if not
automatically enter the Bluetooth pairing state) Red and blue lights blink alternately
enter pairing status( in the case of paired connection long press the key”Bluetooth” to
re-enter the match) Open the Bluetooth devices (such as: mobile phone Bluetooth or
other Bluetooth playback device) looking for new paired device, can be found "ES-151A"
Bluetooth audio equipment identification, and ask you whether need to connect with
the device, press "Yes" or "OK" key, then it can be connected. Connecting the speaker
need to enter the password prompt, the default password is "0000".connection requires
authorization automatically connect that pairing is completed with warning tone.and
the blue indicator light flashes slowly. Match time of three minutes, three minutes later,
no search to the signal exit pairing mode automatically then enter standby.For pairing
again, long press the key“Bluetooth” for 5 seconds boot into pairing state. (Hint: Insert
AUX Φ3.5 stereo plug automatically switches to the AUX mode, allocate Φ3.5 stereo plug
automatically switches to Bluetooth mode and back to the the associated previously
connected Bluetooth devices).
2. Play music in the Bluetooth mode : In Bluetooth mode, the audio with Bluetooth
device is connected, the Bluetooth devices required music player list has been added
music files ,then short press the key ”Bluetooth” will be able to control the mobile
phone (or Bluetooth device) the normal play of music, short press Bluetooth audio, the
blue indicator light flashes slowly, short press + or - to adjust the next track or the prev
.if you long-press + or - to increase or decrease the volume, adjust the volume to
maximum will have warning tone; when the phone has an incoming call, the Bluetooth
speaker will automatically pause play, re-play music after call ends.
3. Bluetooth to connect to other mobile devices : In Bluetooth mode state, long press the
key”Bluetooth” 3 seconds to enter the re-pair state, red and blue lights will interaction
flashing prompt.
4. AUX IN Play Mode : Insert Φ3.5 stereo plug is automatically converted to the AUX input
mode, the red light lit, no volume adjustment.
5. State of charge : In this state the red indicator lights will up ,then red light turns off
when fully charged.
RMS : 4W x 2(speaker)
audio Frequency Response : 80Hz~20kHz