Ulterius Technologies LLC FDN40 用户手册
FDN40
Configuration User Manual
259
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
14.5.1.2 Disabling the QoS Subsystem
1. Execute the following commands to disable QoS on the target.
Disabling the QoS module stops the protocol operation by deleting the
hardware configuration.
hardware configuration.
Enter the Global Configuration Mode.
UltOs# configure terminal
Disable the QoS.
UltOs(config)# qos disable
UltOs(config)# exit
2. View the QoS related global information.
UltOs# show qos global info
QoS Global Information
----------------------
System Control : Start
System Control : Disable
Rate Unit : kbps
Rate Granularity : 64
Trace Flag : 0
14.5.1.3 Making the QoS Subsystem Up
1. Execute the following commands to make the QoS subsystem up.
When QoS subsystem is set as start, resources required by the QoS
module are allocated and QoS module starts running.
module are allocated and QoS module starts running.
Enter the global configuration mode.
UltOs# configure terminal
Make the QoS subsystem up.
UltOs(config)# no shutdown qos
UltOs(config)# exit
2 View the QoS related global information.
UltOs# show qos global info
QoS Global Information
----------------------
System Control : Start
System Control : Disable
Rate Unit : kbps
Rate Granularity : 64
Trace Flag : 0