Ulterius Technologies LLC FDN40 用户手册
CHAPTER 15: OSPF
`FDN40ConfigUM/20160505
318
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
15.5.13.7 Configuring NSSA asbr-default-route translator
Configuring NSSA asbr-default-route translator enables/disables setting of P
bit in the default Type-7 LSA generated by NSSA internal ASBR.
bit in the default Type-7 LSA generated by NSSA internal ASBR.
15.5.13.7.1
CLI Configuration
Execute the following commands to configure the NSSA asbr-default-route
translator.
1. Enter the Global Configuration mode in FDN40-1.
UltOs# configure terminal
2. Enable OSPF globally in the switch FDN40-1.
UltOs(config)# router ospf
3. Configure the OSPF router-id.
UltOs(config-router)# router-id 10.10.2.1
4. Configure the ASBR router status.
UltOs(config-router)#asbr router
5. Configure the OSPF interface.
UltOs(config-router)# network 10.10.2.1 area 0.0.0.6
6. Configure the area 0.0.0.6 as an nssa area.
UltOs(config-router)# area 0.0.0.6 nssa
7. Enable nssa asbr-default-route translator.
UltOs(config-router)# set nssa asbr-default-route translator enable
Disable nssa asbr-default-route translator by executing the following
command. UltOs(config-router)# set nssa asbr-default-route translator disable
15.5.13.7.2
WEB Configuration
O
SPF NSSA can be configured through WEB interface using the
OSPF Area screen. For screenshot, refer section 15.5.13.1.2
15.5.13.8 Configuring NSSA Area Translation Role
Configuring NSSA Area Translation Role configures the translation role for
the NSSA as always or candidate.
the NSSA as always or candidate.
Execute the following commands to configure the NSSA Area Translation
Role.
Role.
15.5.13.8.1
CLI Configuration
1. Enter the Global Configuration mode in FDN40-1.
UltOs# configure terminal