Ulterius Technologies LLC FDN40 用户手册
CHAPTER 2: SYSTEM FEATURES
Configuration User Manual
55
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
2.2.20.1.2
Upgrade from R1_1_3 image to > R1_1_3
The R1_1_3 is the first fully integrated software image that takes care of
automatic upgrade of uboot, IPMC,FPGA, SW application images by the
trigger of a single integrated image upgrade procedure.
automatic upgrade of uboot, IPMC,FPGA, SW application images by the
trigger of a single integrated image upgrade procedure.
1. Start fdn404_r1_1_3.img as usual and arrive at UltOs prompt.
2. Insert all needed IOM cards in all slots in order to ensure IPMC of IOM
2. Insert all needed IOM cards in all slots in order to ensure IPMC of IOM
cards are also upgraded as part of integrated image upgrade.
3. Upgrade Image through CLI
UltOs# firmware upgrade tftp tftp://<server IP>/fdn404_r1_1_4.img
flash:normal
flash:normal
UltOs# firmware upgrade tftp tftp://<server IP>/fdn404_r1_1_4.img
flash:fallback
flash:fallback
UltOs# reload
4. Now system is ready and upgraded fully to new integrated image and all
internal parts like FPGA, IPMC, Uboot and SW application.
2.2.20.2 Software image upgrade through WEB
1. Start existing fdn404_rxxxx.img on board as usual and arrive at FDN40
prompt.
2. Upgrade active image through GUI on active partition
Choose option Home->System->Image Download option.
Choose upgrade type as TFTP, address type as IPv4 and configure
tftp Server IP Address, image File Name and upgrade mode as
Normal for flashing image to normal partition and click apply. Once
image is downloaded, we should see the notification as “Image
Download Successful”
Normal for flashing image to normal partition and click apply. Once
image is downloaded, we should see the notification as “Image
Download Successful”
Connect to the CLI prompt to restart system for new image to boot
up
UltOs#reload
New image should now be loaded from active partition.