Fujitsu 600GB 2.5" 10K SAS FTS:ETED6HB-L 用户手册

Chapter 2  Standard Operations
  2.3  Attaching and Removing the Front Cover

ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-

Copyright 2011 FUJITSU LIMITED

P3AM-5512-02ENZ0

2.3

Attaching and Removing the Front Cover

This section explains how to attach and remove the front cover of the 3.5" type controller 
enclosure or 3.5" type drive enclosure.

■

Procedure for attaching the front cover

Attach the front cover in the following order.

1

Fit the front cover in the left end slot of the controller enclosure to attach.

CAUTION

Do

After completing the operation, be sure to reattach the front cover.

This section explains how to attach and remove the front cover of the 3.5" 
type controller enclosure, but the same procedure is used to attach and 
remove the front cover of the 3.5" type drive enclosure.

IMPORTANT

Be careful so that the part of the front cover to be fit in the slot does 
not touch the power switch (

).

Slot