Extron Electronics EXTSL250W 用户手册

 

Configuring ShareLink 250 W Settings

To access the ShareLink 250 W admin (configuration) pages:

Click the Configure button on the top right hand corner of the landing page  
(

, 

1

, page 34). The Login page opens.

Enter the password and click Login. The default password is “configure.” 

NOTE:  This password can be changed (see 

 on page 48).

After login, the following admin pages appear:

1

  System Status — The System Status page appears by default. This page displays 

basic information about the ShareLink 250 W model, network status, connection status, 
and date and time.

2

  Device Setup — Use this page to adjust the ShareLink 250 W output resolution, login 

code, date and time, and to reboot settings (see 

3

  Network Setup — Use this page to adjust network settings for the ShareLink 250 W, 

such as host name, domain name, IP

settings, DHCP settings, and GateKeeper (see 

4

  WiFi Setup — Use this page to adjust Wi-Fi settings, including wireless LAN, AP and 

Client mode, access point, and Wi-Fi client settings (see 

 on page 42).

5

  SNMP Setup — Use this page to enable or disable SNMP service, and to configure 

settings for managing the ShareLink 250 W via SNMP (see 

6

  OSD Setup — Use this page to upload a custom standby image or reset the stanby 

image to default, and to choose which device information to display on the standby 
screen (see