B & M Merchandise LLC XP 用户手册
Quick Start up Guide
To start using your Radenso XP radar detector follow these easy steps:
1.
Slide the windshield mounting bracket into the QuickMount slot at the front of the radar detector.
2.
Plug the RJ11 plug of the power cord power jack on the Radenso XP on the left side and connect the large plug with
the 12V power socket in your car.
3.
Press the Power button (middle upper button on top of unit) for 2 seconds to turn on Radenso XP.
Unit will power up with a brief start-up sequence. After a few seconds, the Radenso XP will notify you
with a voice message that the satellite is connected.
4. Adjust the volume level by pressing the volume buttons "Vol +" or "Vol -" .
Change Default settings:
Radenso XP is now ready to go. If you want to change any of the default settings of your unit please refer to
the next pages.
the next pages.
Main functions of Radenso XP
The Radenso XP is a very powerful windshield mounted radar detectors. It's designed to protect the driver from
speeding tickets/fines. The Radenso XP communicates with the driver in English by text and voice messages and
its main functions are the detection of microwave radars (X / K / Ka bands), laser guns, red light cameras and
fixed-speed cameras (GPS database).
Notifications:
When a radar signal is detected, the driver will be alerted by a visual text warning and a voice/tone alert. The
display and voice alert will indicate the detected radar band, frequency and signal strength. A beeping warning
tone will increase its intensity with increasing signal strength. The signal strength has 9 levels. GPS alerts are
reported by voice and text; for example "Speed Camera".