INGICS TECHNOLOGY CO. LTD. IBS01 用户手册
INGICS
TECHNOLOGY
Guide
Ver.1
iBS01 User Guide
Introduction
This application note is a guide for user to operate iBS01 beacon. The quick verification is using Nordic’s
Master Control Panel Android APP. Please download this APP with below link:
Operation
There is no battery shipped with the tag. User has to put 2x CR2032 coin battery inside the tag. The figure in the right is an
instruction for inserting the battery.
User can also power the tag by a microUSB cable from a standard USB host
port(like the USB port in a PC) or normal smartphone charger.
There is a power switch like below
figure. Switching on/off depends on
power source. After power on, it starts
and continuously advertise the beacon
message through BLE.
Switch
Position
Position
USB
Power
Power
CR2032
Battery
Battery
Right
On
Off
Left
Off
On
iBS01H sensor position
The iBS01H is using a hall sensor to detect if a magnet is in range or not. Depends on the
strength of magnet, the range is around 0.5cm~1.5cm. The sensor position is marked on the
enclosure.
INGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM
1