INGICS TECHNOLOGY CO. LTD. IGS01 用户手册
INGICS
TECHNOLOGY
Create Connection
iGS01 is in Access Point(AP) mode defaultly. If you have no idea what mode currently it is in, please
press the multi-function button to reset it to the default state. In AP mode, you could scan and connect it
with the WiFi of your NB/PC/Mac/Tablet/Smartphone. It’s name is just like above figure with part of the
mac address. The default key to connect with it is “
12345678
”. You can change it later when you get into
the web UI.
After connection, enter IP address
192.168.10.1
in your broswer. The default account/password are
both “
admin
”. You can change the password later. In web UI, any change need to be saved first. After all
changes made, click reboot to make the changes effective. When In Station mode, the IP address of the
iGS01 is assigned by the the other AP. To get into the web UI, you have to find the assigned IP address.
The following sections describe details of the web UI.
Web User Interface
Wi-Fi
iGS01 can work in Simple AP mode and Station mode. These modes and the related settings can be
managed in this page.
Simple AP
SSID:
The default name is BLE-WiFi plus
the last digits of the mac address. It’s
configurable by user.
Security Protocol:
Open, WPA TKIP, WPA
AES, WPA2 TKIP, WPA2 AES are
supported. WPA2 AES is recommended.
Security Key:
8-63 characters can be
input
Channel:
1~11(ch12 and ch13 could be
supported by request)
INGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM
5