Shandong USR IOT Technology Limited USRBLE100 用户手册
USR-BLE100 User Manual
h.usriot.com
Jinan USR IOT Technology Limited
/ 16
4
Figure 2
Module Debugger software
Firstly, click on the “USR Service”. Then click the “DEBUG” option at the bottom. After it, click on “NOTIFY”.
When it turn to “STOP NOTIFY”, listening state begins. Now we can receive data through serial port. If user
want to send data, click on the upward symbol on the left, find out the “WRITE”, click it and user can type data.
After click “SEND”, serial will receive the data you sent.
want to send data, click on the upward symbol on the left, find out the “WRITE”, click it and user can type data.
After click “SEND”, serial will receive the data you sent.
Figure 3
Module Debugger software
Note: According to test, we found that for BLE, the IOS support better than the Android, both at searching
speed or connecting speed. This is caused by the different of operating and hardware.
2. Overview
2.1. Brief Introduction
USR-BLE100 is a module which support ultra-low power Bluetooth4.1, and this module support master
and slave, user not only can use both master and salve for transparent transmission, also can make wireless
data transmission to the traditional low-end serial device and the device controlled by MCU. User can develop
APP on the basis of standardized BLE protocol, make it a easy way to communicate with module. This module
support MESH network pattern and one-to-many broadcasting, also has built-in iBeacon protocol, user can
data transmission to the traditional low-end serial device and the device controlled by MCU. User can develop
APP on the basis of standardized BLE protocol, make it a easy way to communicate with module. This module
support MESH network pattern and one-to-many broadcasting, also has built-in iBeacon protocol, user can