Zhuhai Ltl Acorn Electronics Co. Ltd. LTL-6511-4G 用户手册
12
4、
Detect the position of the game. When game comes into detective area
from random direction, the corresponding PIR will feedback to camera
processor. The system would judge if there is game enters dual-PIR
sensing area, whether it is in sense activation area of left/right PIR or in
overlapping shooting area of left and right.
from random direction, the corresponding PIR will feedback to camera
processor. The system would judge if there is game enters dual-PIR
sensing area, whether it is in sense activation area of left/right PIR or in
overlapping shooting area of left and right.
In the case the game only enters the sensing area of the side prep sensor
but not sensing area of the centre PIR, the system is designed to be
powered off after 5 seconds.
2.8 Brightness adjustment of night picture
Switch the camera to TEST mode and enter Camera mode, press
key
to adjust the brightness of night picture which will apply to ON mode, it’s
good to avoid overexposure when the object is too close to the camera and
brightness is high.
Three settings of brightness are available for night picture, High, Medium
and Low:
good to avoid overexposure when the object is too close to the camera and
brightness is high.
Three settings of brightness are available for night picture, High, Medium
and Low:
High: the highest brightness of night picture between three settings.
Medium: the brightness is slightly weaker than High settings.
Low: the lowest brightness of night picture between three settings.
Medium: the brightness is slightly weaker than High settings.
Low: the lowest brightness of night picture between three settings.
When adjust brightness in the TEST mode, first press
key to check the
present status of the night picture brightness, press again to adjust the
brightness to High, Medium or Low, the camera will automatically save the
brightness setting you selected, exit the brightness setting in 4 seconds if no
operation.
brightness to High, Medium or Low, the camera will automatically save the
brightness setting you selected, exit the brightness setting in 4 seconds if no
operation.
55°
Activatio
Activatio
Shoot
100°
Left pir
Bobbin
Right pir