Zhuhai Ltl Acorn Electronics Co. Ltd. LTL-6511-4G 用户手册
45
valid in FTP or email
mode only;
mode only;
60
Get the camera to
take picture
immediately and
send to your remote
control mobile, On
(1).
This code is
workable in these
mode: Camera,
Video,
Camera + Video
take picture
immediately and
send to your remote
control mobile, On
(1).
This code is
workable in these
mode: Camera,
Video,
Camera + Video
60*1#
The camera
would take a
picture
immediately and
send to the
remote control
mobile number
after receiving the
SMS command.
would take a
picture
immediately and
send to the
remote control
mobile number
after receiving the
SMS command.
3.13 View Local MPNO Name and Signal Strength on TFT
Screen
Connect the external button control box with display screen to the camera
and switch to ON mode and wait about 1 minute till you hear a short beep,
then you will be able to see the MPNO symbol and the signal strength on the
LCD.
and switch to ON mode and wait about 1 minute till you hear a short beep,
then you will be able to see the MPNO symbol and the signal strength on the
LCD.
To make sure the MMS module works well, at least two bars of signal are
required. If there is only one bar of the signal, it may not assure the MMS
works well.
required. If there is only one bar of the signal, it may not assure the MMS
works well.
If a code other than the MPNO symbol shows up on the screen, it
Mobile Operators
Signal
Signal