Zhuhai Ltl Acorn Electronics Co. Ltd. LTL-6511-4G 用户手册
61
FIRMWARE UPGRADES
The manufacturer reserves the right to upgrade the camera firmware and 4G
module program, please consult with the local distributor for the website to
download the program.
Make sure the camera with enough power before upgrade to avoid the
unsuccessful upgrade or the fault caused by low battery after upgrade.
Please follow below instruction to upgrade:
Prepare SD card
Connect the SD card to camera and back up the SD
card contents to computer (SD card reader may be
needed).
card contents to computer (SD card reader may be
needed).
Retrieve the SD card from computer, insert it into
camera and load batteries.
camera and load batteries.
Format the SD card on the camera.
Upgrade camera firmware
Remove the SD card from the camera and connect the computer.
Copy the camera program FW6511-4G.bin to the root directory of
the SD card. (The effective download address of the camera
program to ask the local product dealer) to SD card write protection
switch to the LOCK position, and then insert the camera.
the SD card. (The effective download address of the camera
program to ask the local product dealer) to SD card write protection
switch to the LOCK position, and then insert the camera.
Connect correctly the camera to the external button control box with
display screen and keep pressing the left button. Set the switch
from the OFF position to the ON position. The information "Update
Firmware Successfully" is shown on the display screen after the
camera is turned on. Release the left button, then press the menu
button to enter the menu to move to the factory settings. Press the
OK button to confirm.
from the OFF position to the ON position. The information "Update
Firmware Successfully" is shown on the display screen after the
camera is turned on. Release the left button, then press the menu
button to enter the menu to move to the factory settings. Press the
OK button to confirm.
Retrieve the SD card and unlock it, then re-insert into camera and
format it. The upgrade will have been finished successfully.
Attention: The upgrade program of Ltl-6511-4G is not compatible to
other models. In other word, an upgrade for Ltl-6511-4G only applies to
Ltl-6511-4G model. If a camera is accidently upgraded by running a
non-compatible program, it will quit working and needs to be sent back
for repair. This issue is not covered under warranty.
Upgrade 4G module program
Copy the program file testsim to the root directory of the SD card.
Retrieve SD card from computer and insert into camera.
Retrieve SD card from computer and insert into camera.