mondo systems inc. SBEV40SUB 用户手册
English
Pairing the Wireless Subwoofer With the Main Unit
When the soundbar system is manufactured, the pairing is preset. Please pair
the subwoofer with the main unit by following the procedure below if
interference occurs or if pairing is interrupted.
the subwoofer with the main unit by following the procedure below if
interference occurs or if pairing is interrupted.
Pairing Button
1
Press
CONNECT
on the back of the subwoofer.
Subwoofer LED
2
Press and hold
CONNECT
on the remote control for 2 seconds until
"CONNT" displays on the main unit.
3
Check the LED status.
The subwoofer LED blink shows the pairing status as follows.
LED
OPERATION
Blinks slowly
The main unit is not paired.
Blinks fast
The main unit is trying to be paired.
Blinking stops.
The main unit is paired completely.
The red LED is continuously on.
Tips:
•
If the wireless connection fails, check for any strong interference (for example,
interference from other electronic devices) around your location. After removing
the strong interference, repeat the procedure described on the left.
interference from other electronic devices) around your location. After removing
the strong interference, repeat the procedure described on the left.
• If there is a strong electromagnetic wave product nearby, interference
may occur. Place the main unit away from the location.
15