mondo systems inc. SBEV40SUB 用户手册
English
Selecting a Soundbar Input Mode
Your soundbar acts as a device for switching between all the input sources that
are plugged into it.
are plugged into it.
••On the main unit
Press INPUT repeatedly to select a soundbar input source. The corresponding
input source will then be activated.
••On the remote control
When one of the source buttons on the remote control is pressed, the
corresponding input will be activated.
corresponding input will be activated.
Adjusting the Volume
You can adjust the volume from MIN 00 to MAX 25.
••Press VOL + to increase the volume level.
••Press VOL - to decrease the volume level.
Adjusting the Delay Between the Sound and the Video Image (AV
Sync)
Sync)
You can delay the sound by using this function when the video image is slower than
the sound on an HDMI connection. You can set the delay from 0 to 330 ms.
••On the main unit
1
Press and hold
MUTE
until "DELAY" is displayed on the main unit.
2
Press
VOL + / VOL -
repeatedly to adjust the difference between the video
image and the sound.
3
Press
O
to confirm.
••On the remote control
1
Press and hold
Sync + / Sync -
until "DELAY" is displayed on the main unit.
2
Press
Sync + / Sync -
repeatedly to adjust the difference between the
video
image and the sound.
3
Press
VOL + / VOL -
to confirm.
22