Canary CLE-1061S 用户手册
Standalone 10/100 Mbs UTP-to-Fiber Bridging Media Converters
CLE-106X – Standalone UTP-to-Fiber Bridging Media Converters
•
Converters are Compliant with IEEE 802.3, 802.3u 10/100
Mbs Ethernet standards
•
148,800 packets/second forwarding rate at 100 Mbs and
14,880 pps at 10 Mbs
•
Switch for hard-setting (Forced) Full-duplex or Half-duplex
operation on fiber port
•
Models with Fiber connectors are compatible with
100BASE-FX
•
Converters are transparent to Full and Half-duplex traffic
•
UTP port connectors have MDI / MDI-X crossover switch
•
Full array of status / diagnostic LEDs
•
512 MAC address lookup table
•
Store-and-forward operation
•
MAC Layer Bridge
•
5K Byte buffer
•
IEEE 802.1D
•
Auto-sensing, 110 / 230 VAC Power Supply
• Additional models include: Single-Fiber Bi-Directional single-
mode and Extended Reach single-mode are available as special
order
Ordering Information
Fast Ethernet
Media
Min. Tx
Max. Tx
Rx
Min. PWR
Max.PWR
Max. Input
Connector
Wavelengths
Transmit
Model Numbers
Types
PWR
PWR
Sensitivity
Budget
Budget
PWR
Type
(ηm)
Distance
CLE-1061
UTP / MM
-20.0 dBm
-14.0 dBm
-31.0 dBm
11.0 dB
17.0 dB
-8.0 dBm
SC
1310 ηm
2000 m
CLE-1062
UTP / MM
-20.0 dBm
-14.0 dBm
-31.0 dBm
11.0 dB
17.0 dB
-8.0 dBm
ST
1310 ηm
2000 m
Specifications above in blue are for multi-mode, fiber connectors.
Specifications below for single-mode, fiber connectors.
CLE-1061S
UTP / SM
-15.0 dBm
-8.0 dBm
-34.0 dBm
19.0 dB
26.0 dB
-7.0 dBm
SC
1310 ηm
30 Km
CLE-1062S
UTP / SM
-15.0 dBm
-8.0 dBm
-34.0 dBm
19.0 dB
26.0 dB
-7.0 dBm
ST
1310 ηm
30 Km
CLE –106X models are available with long-reach single-mode connectors and Single-Fiber, Bi-Directional Connectors as special order. Please contact Canary for correct model numbers
and additional ordering information.
and additional ordering information.
Optical Specifications
Illustrated: Bridging Media Converter