Channel Vision P-0921 产品宣传页
Speak to and grant access to two doors or a front door and an entry gate from any standard phone in the house by
pressing a touchtone code*. Pair the system with a Channel Vision IU or DP Series door station and a modulator for
a complete residential AV access control solution.
P-0921
2-Door Telephone Entry Controller
Features
Benefi ts
2-Door Connections
Connect system to two Channel Vision door intercom
stations to speak to and grant access to either
RJ-45 & Screw Terminal Connections
Easy & versatile connection options
Distinctive Telephone Ring
Distinguish between door visitors or incoming phone calls
Works Without an Active Phone Line
(No CO Mode)
Perfect for installation in new homes when phone lines are not
yet active OR for households that rely mainly on cell
phones but still want the phone access to the front door
Compatible with Door Intercom Station
Works with Channel Vision IU & DP door stations –
Does not support Panasonic KSU system IU & DPs
Door Bell Chime Option
Door notifi cation via telephone ring & standard door bell chime
2-Wires to the Front Door
Retrofi t IU or DP intercom door station easily
with existing doorbell chime wiring
3 Active LED Status Indicators
When phones ring; When door intercom station is in use;
When door strike is activated
Doorbell Tone at Door Station
Visitor hears a tone when they press the doorbell button to
acknowledge its ringing throughout the house
Built-In Aux Relay
Unlocks doors or gates remotely by the phone or can be utilized as a
trigger contact to enable the input of an external paging system
Specifi cations
Typically @ 25° C
Power Supply
12VAC, 500mA
Connectors
Screw terminals & RJ-45 (TIA 568A)
Cable Requirements
CAT3 or CAT5, 18~24 AWG
REN
~ 0.1
Dimensions
6.5” (h) x 7” (w) x 1.5” (d)
Operating Temperature
-10°C to +50°C
Ring Output
>5 (capable of ringing > 10 phones with a REN of 0.5)
Compliances
FCC Part 15, subpart B & FCC Part 68 requirements; RoHs;
Power supply meets UL1310 & CSA standards