Transition Networks CCSCF3029-113 产品宣传页
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
LOOP BACK
Specifications
Standards
ANSI, ITU-TS, ETSI, AT&T, G.703, G.921 & G.955
Coax Conectors
75 ohm coax
TX output
TX output
RX input
min: +2.5 dBm
min: -9.7dBm
max: +9.1 dBm
max: +10.5 dBm
Fiber Connectors
SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
Data Rates
DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps;
STS-1 = 51.8 Mbps
STS-1 = 51.8 Mbps
Status LED
Power, Coax link status, coax loop-back status, AIS on
coax link; Fiber link status, fiber loop-back status,
AIS on fiber link
coax link; Fiber link status, fiber loop-back status,
AIS on fiber link
Dimensions
Width: .87" [22 mm];
Depth: 5.0" [127 mm];
Height: 3.4" [86 mm]
Depth: 5.0" [127 mm];
Height: 3.4" [86 mm]
Power Consumption
3.0 Watts
Environment
see chassis specifications
Shipping Weight
1.0 lbs. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A; CE Mark
MTBF
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Greater than 687,000 hours (Bellcore)
Warranty Lifetime
Ordering Information
CCSCF3011-110
(2) Coax (BNC)
to 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 14.0 dB
CCSCF3013-110
(2) Coax (BNC)
to 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 14.0 dB
CCSCF3014-110
(2) Coax (BNC)
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CCSCF3015-110
(2) Coax (BNC)
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
CCSCF3016-110
(2) Coax (BNC)
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 32.0 dB
CCSCF3017-110
(2) Coax (BNC)
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CCSCF3040-110
(2) Coax (BNC)
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs
CCSCF3029-110
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CCSCF3029-111
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CCSCF3029-112
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CCSCF3029-113
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CCSCF3029-114
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/37.3 mi.] Link Budget: 29.0 dB
CCSCF3029-115
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CCSCF3029-116
(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[80 km/49.7 mi.] Link Budget: 33.0 dB
CCSCF3029-117
(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[80 km/49.7 mi.] Link Budget: 32.0 dB
CCSCF30xx-11x
point system™ slide-in-module network interface device
DS3-T3/E3 & STS-1
Coax to Fiber
DS3-T3/E3 and STS-1 Coax to Fiber NID
Features
AIS (Alarm Indication Signal)
Coax Line Build Out
Switch selectable for DS3/T3 or E3
Loopback – Coax and Fiber
LEDs for immediate visual status
Supports dual or single fiber
Supports multimode and singlemode
fiber at a variety of distances
Supports CWDM SFPs
SNMP management when used with
Point System™ chassis and
management module
management module
Field Upgradeable Firmware when used
with Point System™ Chassis and
management module
management module
see also:
DS3-T3/E3 Point System™ Stand-Alone NID
The DS3 – T3/E3 & STS-1 copper to fiber
network interface device (NID) provides a
solution for those users that need to extend
DS3 connections over fiber.
network interface device (NID) provides a
solution for those users that need to extend
DS3 connections over fiber.
The DS3 – T3/Es & STS-1 supports Small
Form Pluggable (SFP) transceivers to sup-
port a variety of fiber types, distances and
wavelengths to provide maximum flexibil-
ity across a variety of network topologies.
The use of Coarse Wave Division Multiplex-
ing (CWDM) SFPs can be utilized to further
increase the bandwidth capacity of the fiber
infrastructure.
Form Pluggable (SFP) transceivers to sup-
port a variety of fiber types, distances and
wavelengths to provide maximum flexibil-
ity across a variety of network topologies.
The use of Coarse Wave Division Multiplex-
ing (CWDM) SFPs can be utilized to further
increase the bandwidth capacity of the fiber
infrastructure.
The DS3 – T3/E3 & STS-1 NID must be
used in pairs*. A typical installation will in-
clude a chassis card installed in the Point
System™ locally and a stand-alone device
installed at the remote location.
used in pairs*. A typical installation will in-
clude a chassis card installed in the Point
System™ locally and a stand-alone device
installed at the remote location.
Integrate Voice & Data on Fiber Network
*The CCSCF3040-110 will only work with
another CCSCF3040-110 or SCSCF3040-110.
The product does not work with a -10x model.
another CCSCF3040-110 or SCSCF3040-110.
The product does not work with a -10x model.