Transition Networks SISTF1011-241-LRT 产品宣传页
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
IEEE Std. 802.3, 802.3u, 802.3x
Status LEDs
PWR (Power): ON = Unit has power connected
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
Fault: ON = Power failure or port link failure
LNK/ACT (fiber): ON = Link;
Flashing = data transmitting
FDX/COL (fiber): ON = Full duplex mode;
Flashing = collisions occurring
RJ-45 (Ports 1 – 4): ON orange = Full duplex mode;
Flashing orange = collisions occurring; ON green =
UTP link; Flashing green = data transmitting
Dip Switches
1: Full Duplex Fiber/Half Duplex Fiber
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
1K
Data Memory Buffer
512 Kb
Backplane
1.0 Gbps
Dimensions
Width: 1.2” [30 mm]
Depth: 3.7” [195 mm]
Height: 5.5” [140 mm]
Ingress Protection
IP 30
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs with
reverse polarity protection; Additional barrel
connector
Power Consumption
3.3 Watts
Environment
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
UL Class 1 Div 2 for hazardous environments
EMI Compliance
CISPR/EN55022; EN60950 Class A; FCC Class A;
CE Mark; EN61000-4-2; EN61000-4-3;
EN61000-4-4; EN61000-4-5; EN61000-4-6
Environmental Compliance
IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
Lifetime
Ordering Information
Extended Operating Temperature:
-40°C to +75°C
-40°C to +75°C
SISTF1013-241-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SISTF1014-241-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SISTF1011-241-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Optional Accessories (sold separately)
External AC/DC Power Supply
SPS-UA12DHT
(100-240 VDC input
0°C to +70°C operating temperature)
25083
Universal AC/DC Input DIN Rail Mounable
+12 VDC Power Supply
DC Voltage: 12V; Current Range: 0~2A;
Output Rated Power: 24 Watts
Input Voltage Range: 85~264 VAC;
120~370 VDC
Working Temperature: -20~+60°C
+12 VDC Power Supply
DC Voltage: 12V; Current Range: 0~2A;
Output Rated Power: 24 Watts
Input Voltage Range: 85~264 VAC;
120~370 VDC
Working Temperature: -20~+60°C
SISTF101x-241-LRT
SISTF101x-241-LRT
industrial switch
Class 1 Div 2 Industrial Switch
10/100BASE-TX to 100BASE-FX
Industrial Switch
Extend Network Distance
in Industrial Applications
in Industrial Applications
Transition Networks’ industrial
switches are hardened devices de-
signed to reliably operate in harsh
environments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
Eliminate EMI and RFI issues or over-
come distance limitations with copper
based cabling by using the Industrial
Media Converter to convert your cop-
per based equipment over to fiber
optics. The media converter can con-
nect to either 10Base-T or 100Base-TX
ports and provides a 100Base-FX fiber
optic connection for links up to 20 km.
switches are hardened devices de-
signed to reliably operate in harsh
environments such as those found on
factory floors, outdoor enclosures or
other hazardous environments.
Eliminate EMI and RFI issues or over-
come distance limitations with copper
based cabling by using the Industrial
Media Converter to convert your cop-
per based equipment over to fiber
optics. The media converter can con-
nect to either 10Base-T or 100Base-TX
ports and provides a 100Base-FX fiber
optic connection for links up to 20 km.
Industrial
Features
4
Auto-Negotiation
4
AutoCross™ [
4
DIN Rail Mounting and Wall
Mount Brackets Included
4
Extended (-40°C to 75°C)
operating temperature
4
Dual Auto-Sensing Redundant
DC Power Inputs
4
Barrel connector interface cable
included for connecting external
AC/DC power supply
AC/DC power supply
4
Class 1 Div 2 Certified