Zebra RW 220 R2D-0UKA010E-00 用户手册
产品代码
R2D-0UKA010E-00
The RW 420 Route Palette four-bay
station houses four RW 420 Print
Stations or Route Palettes for easy
dock-and-go charging. It can be
mounted on the wall and requires just
one electrical outlet, so it’s perfect for
field-service dispatch centres.
station houses four RW 420 Print
Stations or Route Palettes for easy
dock-and-go charging. It can be
mounted on the wall and requires just
one electrical outlet, so it’s perfect for
field-service dispatch centres.
RW 420 four-bay power station
The RW 420 four-bay power station
charges up to four RW 420 printers via a
single power outlet, reducing the number
of cables and power-supply requirements
in your dispatch room.
charges up to four RW 420 printers via a
single power outlet, reducing the number
of cables and power-supply requirements
in your dispatch room.
Use the power station to simply dock
and go. At the end of a shift, field-service
personnel can simply slip the printer into
a slot to recharge it until next required,
then retrieve it before leaving on their
next route.
and go. At the end of a shift, field-service
personnel can simply slip the printer into
a slot to recharge it until next required,
then retrieve it before leaving on their
next route.
Four-bay power station for RW 420
Route Palette and Print Station
Route Palette and Print Station
Use the RW 220 or RW 420 vehicle
cradles to charge your printing device
while on the move.
cradles to charge your printing device
while on the move.
An intuitive push-button release makes
the operation of this cradle simple and
efficient, providing convenient storage
and integrated charging of the printer
while in a vehicle.
the operation of this cradle simple and
efficient, providing convenient storage
and integrated charging of the printer
while in a vehicle.
Fanfold media can be fed through the
base of the cradle to extend the media
capacity of the printer, and the cradle can
also be mounted to a RAM arm for flexible
access and orientation once installed.
base of the cradle to extend the media
capacity of the printer, and the cradle can
also be mounted to a RAM arm for flexible
access and orientation once installed.
RW 420 battery eliminator
If using an RW 420 printer inside a
vehicle permanently, use the RW 420
battery eliminator to power the printer
directly from the vehicle power source
without a battery or the associated
charging and replacement requirements.
vehicle permanently, use the RW 420
battery eliminator to power the printer
directly from the vehicle power source
without a battery or the associated
charging and replacement requirements.
Vehicle cradles
Using the DC/DC lithium ion vehicle
charger, plug your RW series printer into
your vehicle’s cigarette-lighter adaptor
for convenient charging on the go.
charger, plug your RW series printer into
your vehicle’s cigarette-lighter adaptor
for convenient charging on the go.
Alternatively, the DC/DC lithium ion
vehicle charger with crimped terminations
enables you to hard-wire your RW series
printer into your vehicle’s power supply.
Three voltage options are available:
12VDC, 9-30VDC and 30-60VDC.
vehicle charger with crimped terminations
enables you to hard-wire your RW series
printer into your vehicle’s power supply.
Three voltage options are available:
12VDC, 9-30VDC and 30-60VDC.
Chargers are available for:
• Printers
• Route Palette and RW Print Station
• Vehicle cradles
RW series USB to RJ-45
The USB port on the RW series mobile
printers is used for the setup and
maintenance of the printer. For wired
communications, Zebra recommends
using a serial RJ-45 cable for connection
to your RW printer’s RS-232C serial port.
printers is used for the setup and
maintenance of the printer. For wired
communications, Zebra recommends
using a serial RJ-45 cable for connection
to your RW printer’s RS-232C serial port.
RW series soft cases and
hand straps
hand straps
Add additional protection to your RW
mobile printers with an environmental
soft case.
mobile printers with an environmental
soft case.
Shoulder straps and hand straps can be
used to enhance the flexibility of use of
the RW series printers.
used to enhance the flexibility of use of
the RW series printers.
RW series in-vehicle
charger options
charger options