Asrock X79 Extreme3 X79 EXTREME3 用户手册

32

* ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to 

  ASRock website for the motherboard support list: http://www.asrock.com   

2.10  ASRock Smart Remote Installation Guide

ASRock Smart Remote is only used for ASRock motherboard with CIR header. 

Please refer to below procedures for the quick installation and usage of ASRock 

Smart Remote.

Step1. 

Find the CIR header located next  

 

to the USB 2.0 header on ASRock 

 motherboard. 

Step2. 

Connect the front USB cable to the 

 

USB 2.0 header (as below, pin 1-5) 

 

and the CIR header. Please make 

 

sure the wire assignments and the 

 

pin assignments are matched 

 correctly. 

Step3. Install 

Multi-Angle CIR Receiver to 

 

the front USB port. If Multi-Angle 

 CIR 

Receiver cannot successfully 

 

receive the infrared signals from 

 

MCE Remote Controller, please try 

 

to install it to the other front USB 

 port. 

1. 

Only one of the front USB port can support CIR function. When 

 

the CIR function is enabled, the other port will remain USB  

 

 function.

2. 

Multi-Angle CIR Receiver is used for front USB only. Please do 

 

not use the rear USB bracket to connect it on the rear panel.  

 

Multi-Angle CIR Receiver can receive the multi-direction infrared 

 

signals (top, down and front), which is compatible with most of 

 

the chassis on the market.

3. 

The Multi-Angle CIR Receiver does not support Hot-Plug 

 

function. Please install it before you boot the system.