Asrock K8UPGRADE-760GX 用户手册

2 6

Use this to adjust TRCD values. Configuration options: [Auto], [2CLK], [3CLK],

[4CLK], [5CLK], and [6CLK].

Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK],

[7CLK], [8CLK], [9CLK], [10CLK], [11CLK], and [12CLK].

Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK],

[4CLK], [5CLK], and [6CLK].

Use this to adjust values for MA timing. Configuration options: [2T], [1T]. The

default value is [2T].

3.3.2 Chipset Configuration

Select [Auto] or [Disabled] for the onboard AC97 Audio feature.

This allows you to enable or disable the onboard LAN feature.

It refers to a section of the PCI memory address range used for graphics

memory. It is recommended to leave this field at the default value unless the

installed AGP card’s specifications requires other sizes.

For an AGP 3.0 card, you may set AGP Data Rate between [8X] or [4X], and

the default value is [8X]. For an AGP 2.0 card, you may set AGP Data Rate

among [4X], [2X], and [1X], and the default value is [4X].

Use this item to enable or disable the feature of AGP fast write protocol

support.