Asrock K8UPGR-VM800 K8UPGRADE-VM800 用户手册

2 7

2 7

2 7

2 7

2 7

Use this to select DRAM voltage. Configuration options are [Auto], [High],

and [Low]. The default value is [Auto].

Use this to select among [Normal] and [High] for AGP Voltage. The default

value is [Auto].

You may select [Auto], [8MB], [16MB], [32MB], or [64MB] as the Onboard

AGP share Memory. The default value of this feature is set to [Auto]. When

the total memory is equal or above 256MB, the share memory size will be

[64MB]; otherwise, please set the share memory size to [32MB].

This item will switch the PCI Bus scanning order while searching for video

card. It allows you to select the type of Primary VGA in case of multiple

video controllers.

It refers to a section of the PCI memory address range used for graphics

memory. It is recommended to leave this field at the default value unless the

installed AGP card’s specifications requires other sizes.

Use this to adjust values for MA timing. Configuration options: [2T], [1T]. The

default value is [2T].

3.3.2

3.3.2

3.3.2

3.3.2

3.3.2 Chipset Configuration

Chipset Configuration

Chipset Configuration

Chipset Configuration

Chipset Configuration