Toshiba JK-PHI 产品宣传页

7.85"

11.42"

8.8"

8.8"

11.42"

8.8"

1.5"

Toshiba America Information Systems, Inc. Imaging Systems Division, Security Products Group
9740 Irvine Boulevard, Irvine, California 92618 • 1-800-550-8674 • www.cctv.toshiba.com

©2002 Toshiba America Information Systems, Inc. 
All specifi cations are subject to change.

Indoor / Outdoor Dome 

JK-PHI / JK-PHO

The JK-PHI (indoor) and JK-PHO (outdoor) are dome housings for Toshiba’s 

Surveillix Dome™ camera. These products offer versatility and outstanding 

camera protection in a compact size. 

•  Durable engineered plastic top, 94V0. The JK-PHO is also UV protected

•  Quick connect pendant mount assembly

•   Accepts single fi xed camera

•  The JK-PHO is designed to meet NEMA 4X for water ingress and IP66, 

with a temperature rating of -20˚ to +120˚

 

The JK-PHI indoor housing and JK-PHO outdoor housing shall be a 

pendant mount dome housing for Toshiba’s Surveillix Dome™ camera 

system. The units shall be designed to accommodate Toshiba’s Surveillix 

Dome™ camera system. The JK-PHO enclosure shall also be equipped 

with blowers and thermostatically controlled heaters. The input power for 

the heater and blower will be 27 watts at 24 VAC. The housings shall be 

manufactured from a high-impact engineered plastic, with a UL fl ame 

rating of 94V0, and the JK-PHO versioin is also UV protected. The dome 

shall be made of a thermoformed, optically clear, cell-cast acrylic mterial. 

The dome shall be held in place with a minimum of 3 fasteners, and a 

safety cable shall be provided to hold the dome while servicing. Access to 

the enclosure shall be from below with 3 captive fasteners, used to press 

the dome against a sealing O-ring. A twist-off feature shall allow for the 

fi nal removal of the dome. A quick-release bracket at the top of the unit 

shall be provided for ease of installation and quick removal of the unit.

Standard      24 VAC    27 watts (excluding camera)

Size (hxwxd):       

12.8” x 11.4” x 16.1”

Weight: 

     10 

lbs. 

Construction:  

  Top: 

      

.125” 

engineered 

plastic

  Dome: 

     

Cell-cast 

acrylic

  Pendant Mount Bracket: 

Cast and machined aluminum  

Components:

  Seals: 

     

.136” 

x 

10.25” 

O-ring

Operating Temperature: 
  JK-PHO         

-20˚ F to +120˚ F

Heater activates at +40˚ F (+/-8˚), deactivates at +60˚ F (+/-8˚)
Effective Projected Area (EPA): Approx. 180 square inches
Operating Humidity: Up to 100%

  - Pendant mount unit with clear lower dome, 24 VAC input for 

heater/blower/camera

 - Pendant mount unit with clear lower dome, 24 VAC input camera

 - Gooseneck wall mount

 - Aluminum corner mount adapter

 - Aluminum pole mount adapter

 - Aluminum parapet mount

 

JK-PHO 

10 lbs 

11 lbs 

17 x 14 x 17

JK-PHI 

10 lbs 

11 lbs 

17 x 14 x 17

* Shipping weights depend on box dimensions.