Peerless PJF2-45 数据表

Peerless Industries, Inc.
3215 W. North Ave.  Melrose Park, IL 60160
708-865-8870   800-865-2112  Fax 708-865-2941

© 2005 Peerless Industries, Inc.  All rights reserved.

Peerless is a registered trademark of Peerless Industries, Inc.

Vector Pro, Armor Lock, and Armor Lock Plus are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

The Universal Vector Pro

 II features a sleek, low profile design, a

ball and socket design for multidirectional positioning (roll, pitch, and
yaw), a structural ceiling plate, complete Armor Lock

™

 security, and an

extension column connector.

• Ships fully assembled and attaches to projector adapter plate with

a partial rotation and engages into place

• *30° (±15°) pitch, 30° (±15°) roll, 360° yaw

• Theft-resistant Armor Lock security for complete, integrated

security from projector to ceiling

• Spring loaded captive screw and thumb screw allow for easy

projector removal

• Ceiling plate included with mount

• 1/4" spacers included with mount allow cords to be routed above

ceiling plate, if desired (spacers are optional to use)

• Threads directly into any ceiling plate that accepts standard 1.9"

OD tubing

• Can be mounted with an extension column (using Extension

Column Connector included)

• Universal clamp-style bracket included with mount.

• Can be mounted to threaded rod using ACC 810 - Threaded Rod

Adapter (sold separately) and Extension Column Connector (included)

 

Roll & pitch may be limited when flush mounted depending on the

dimensions of the specific projector.

TECHNICAL DATA SHEET -

The Vector Pro II projector mount shall be Peerless Models PJF2 35, PJF2 40, PJF2 45 and shall be mounted where indicated on the
plans. It shall feature 30° (±15°) pitch, 30° (±15°) roll, and 360° yaw. It shall have a 50 lb load capacity.  It shall have a quick release spring
loaded screw for easy removal and installation of the projector. It shall feature security screws.  It shall be constructed of aluminum and
nylon finished in black. The main housing is constructed of aluminum. The connector, which locks into the steel adapter plate, is
constructed of nylon and is secured to the aluminum ball joint with a 1/4

 

-20 x 1 1/2" long steel bolt. The nylon material can take direct heat

up to 250° without any deformation.  Its melting point is 500° F.  The Vector Pro II is capable of holding up to 50 lb at the maximum 15° roll
or pitch. Installation and assembly shall be done in accordance with the instructions provided by the manufacturer.

• Fixed and Adjustable length 1 1/2" NPT Extension

Columns (“EXT” or “ADJ” models)

• Black Extension Column Connector with Cord

Management (ACC 850)

• Black External Cord Wrap (ACC 852 & ACC 856)

• Concrete Anchors (ACC 205 or ACC 203)

• Armor Lock Plus

™

 security cable with Kensington

Lock (ACC 020)

• Armor Lock Plus

™

 security cable (ACC 021)

• Lightweight Suspended Ceiling Plate (CMJ 455)

• Anti-Vibration Ceiling Plates (ACC 840 & 845)

• Side to Side Adjuster (ACC 830)

• Threaded Rod Adapter (ACC 810)

CAUTION:  Before installation, identify the location of all
vents and ports on the projector to ensure they will
not be obstructed by the universal mount.  Blocked
vents may cause damage to the equipment.