Asrock K7Upgrade-600 K7UPGR-600 用户手册

4 0

Select [Enabled] or [Disabled] for the onboard AC’97 Audio feature.

You may set the HyperTransport width as [8 bit], [16 bit] or [Auto]. The

default value is [Auto].

You may set the HyperTransport speed as [Auto], [200 MHz], [400 MHz],

[600 MHz], or [800 MHz]. The default value is [Auto].

    

    

Reserved for AGP Card access adjusting.

4.3.3 ACPI Configuration

Use this item to select whether to auto-detect or disable the Suspend-to-

RAM feature. Select [Auto] will enable this feature if the OS supports it. If

you set this item to [Disabled], the function “Restore on AC/Power Loss”

will be hidden.

Use this item to set the power state after an unexpected AC/power loss. If

[Power Off] is selected, the AC/power remains off when the power in-

stalled AGP card’s specifications requires other sizes.

Use this item to enable or disable Ring-In signals to turn on the system from

the power-soft-off mode.

Use this item to enable or disable PCI devices to turn on the system from the

power-soft-off mode.